Tweet
bác nào giúp em với
em đang hoc ********* có 2 câu kô hiêu các bác giúp em với
Q1. In a Hotspot Question, If a router RI has a packet with a destination address 192.168.1.255, what describes the operation of the network?
A. R1 will forward the packet out of all interfaces
B. R1 will drop this packet because it is not a valid IP address
C. As R1 forwards the frame containing this packet Sw – A will add 192.168.1.255 to its MAC table.
D. R1 will encapsulate the packet in a frame with a destination MAC address of FF-FF-FF-FF-FF-FF-FF
E. As R1 forwards the frame containing this packet , Sw –A will forward it to the device assigned the IP address of 192.168.1.255
Q2. Users on the 192.168.1.0/24 network must acess files located on the server 1.what route should be configured on R1 for file requests to reach the server?
A. ip route 0.0.0.0.0.0.0 s0/0/0
B. ip route 0.0.0.0.0.0.0.0.0.0 209.165.200.226
C. ip route 209.165.200.0 255.255.255.0 192.168.1.250
D. ip route 192.168.1.0 255.255.255.0 209.165.100.250
Q3. when a packet is sent from host1 to server 1, in how many different frames will the packet be encapsulated as it is sent across the internetwork?
A. 0
B. 1
C. 2
D. 3
E. 4
Q4. What must be configured on the network in order for users on the internet to view web pages located on web server 2 ?
A. on R2, configure a default static route to the 192.168.1.0 network
B. on R2, configure DNS to resolve the URL assigned to web server 2 to the 192.168.1.10 address
C. On R1, configure NAT to translate an address on the 209.165.100.0/24 network to 192.168.1.10
D. On R1, configure DHCP to assign a registered IP address on the 209.165.100.0/24 network on web server 2
Q5. The router address 192.168.1.250 is the default gateway for both the web server 2 and Host 1. what is the correct subnet mask for this network?
A. 255.255.255.0
B. 255.255.255.192
C. 255.255.255.250
D. 255.255.255.252
Scenario 2
Q1. what destination layer 2 address will be used in the frame header containing a packet for host 172.30.4.4 ?
A. 704
B. 196
C. 702
D. 344
Q2 A static map to the S – AMER location is required .which command should be used to create this map?
A. frame relay map ip 172.30.0.3 704 broadcast
B. frame relay map ip 172.30.0.3 196 broadcast
C. frame relay map ip 172.30.0.3 702 broadcast
D. frame relay map ip 172.30.0.3 344 broadcast
Q3. Which connection uses the default encapsulation for serial interfaces on Cisco routers?
A. The Serial Connection to the Mid East branch Office
B. The Serial Connection to the Deep South branch Office
C. The Serial Connection to the North Central branch Office
D. The Serial Connection to the Multinational Core
Q4. If required, what password should be configured on the router in the Mid east branch office to allow a connection to be established with the Dubai router ?
A. No Password is required
B. Enable
C. Secret
D. telnet
E. console:(
Q1. In a Hotspot Question, If a router RI has a packet with a destination address 192.168.1.255, what describes the operation of the network?
A. R1 will forward the packet out of all interfaces
B. R1 will drop this packet because it is not a valid IP address
C. As R1 forwards the frame containing this packet Sw – A will add 192.168.1.255 to its MAC table.
D. R1 will encapsulate the packet in a frame with a destination MAC address of FF-FF-FF-FF-FF-FF-FF
E. As R1 forwards the frame containing this packet , Sw –A will forward it to the device assigned the IP address of 192.168.1.255
Q2. Users on the 192.168.1.0/24 network must acess files located on the server 1.what route should be configured on R1 for file requests to reach the server?
A. ip route 0.0.0.0.0.0.0 s0/0/0
B. ip route 0.0.0.0.0.0.0.0.0.0 209.165.200.226
C. ip route 209.165.200.0 255.255.255.0 192.168.1.250
D. ip route 192.168.1.0 255.255.255.0 209.165.100.250
Q3. when a packet is sent from host1 to server 1, in how many different frames will the packet be encapsulated as it is sent across the internetwork?
A. 0
B. 1
C. 2
D. 3
E. 4
Q4. What must be configured on the network in order for users on the internet to view web pages located on web server 2 ?
A. on R2, configure a default static route to the 192.168.1.0 network
B. on R2, configure DNS to resolve the URL assigned to web server 2 to the 192.168.1.10 address
C. On R1, configure NAT to translate an address on the 209.165.100.0/24 network to 192.168.1.10
D. On R1, configure DHCP to assign a registered IP address on the 209.165.100.0/24 network on web server 2
Q5. The router address 192.168.1.250 is the default gateway for both the web server 2 and Host 1. what is the correct subnet mask for this network?
A. 255.255.255.0
B. 255.255.255.192
C. 255.255.255.250
D. 255.255.255.252
Scenario 2
Q1. what destination layer 2 address will be used in the frame header containing a packet for host 172.30.4.4 ?
A. 704
B. 196
C. 702
D. 344
Q2 A static map to the S – AMER location is required .which command should be used to create this map?
A. frame relay map ip 172.30.0.3 704 broadcast
B. frame relay map ip 172.30.0.3 196 broadcast
C. frame relay map ip 172.30.0.3 702 broadcast
D. frame relay map ip 172.30.0.3 344 broadcast
Q3. Which connection uses the default encapsulation for serial interfaces on Cisco routers?
A. The Serial Connection to the Mid East branch Office
B. The Serial Connection to the Deep South branch Office
C. The Serial Connection to the North Central branch Office
D. The Serial Connection to the Multinational Core
Q4. If required, what password should be configured on the router in the Mid east branch office to allow a connection to be established with the Dubai router ?
A. No Password is required
B. Enable
C. Secret
D. telnet
E. console:(
Comment