• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

lỗi cisco aironet 1200 series

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • lỗi cisco aironet 1200 series

    Tình hình là e cấu hình con ap aironet 1200 series. laptop thấy sóng wifi mạnh, mà ko connect vào wifi đc. e ko cần cấu hình nhìu. chỉ cần phát wifi gia dình xaj thôi. mog các a chỉ bảo. a nào cho e cái Yahoo để e gửi teamview hướng dẫn giúp e. thanks

  • #2
    Bạn thay các thông số như: IP, DNS, SSID....trong cấu hình này và xài nhé! Nếu có gì thắc mắc post cho mình!
    sh run
    Building configuration...

    Current configuration : 1552 bytes
    !
    version 12.3
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    !
    hostname ap
    !
    no logging console
    enable secret 5 $1$beuI$w4azWXW2oHk7X6uNkGDd6/
    !
    ip subnet-zero

    !
    ip dhcp pool .........
    network ......................
    default-router .......................
    dns-server ...........................
    lease 0 0 30
    !
    !
    no aaa new-model
    !
    dot11 ssid ................
    authentication open
    guest-mode
    !
    !
    !

    !
    bridge irb
    !
    !
    interface Dot11Radio0
    no ip address
    no ip route-cache
    !
    encryption key 1 size 40bit 7 5A0D516D3CF3 transmit-key
    encryption mode wep mandatory
    !
    ssid .....................
    !
    speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
    station-role root
    --More-- bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    !
    interface FastEthernet0
    ip address ...............................
    no ip route-cache
    duplex auto
    speed auto
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    hold-queue 80 in
    !
    interface BVI1
    ip address ........................
    no ip route-cache
    !
    ip http server
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779...onfig/help/eag
    !
    !
    control-plane
    !
    bridge 1 route ip
    !
    !
    !
    line con 0
    line vty 0 4
    login local
    !
    end

    ap#

    Comment


    • #3
      thanks nhiu nhe.mà sao ko đặt pass word wifi được nhỉ. báo lỗi enter a hexadecimal number for encryption key1. thử đủ loại password mà ko đc

      Comment


      • #4
        bạn thử cấu hình bằng web và đặt pass trong đó nhé, nhớ chọn wep và key size là 40 bit

        Comment


        • #5
          Cấu hình WPA2-PSK thì thế nào các bạn?
          CÔNG TY CỔ PHẦN THẾ GIỚI NĂNG LƯỢNG MỚI
          64 Huỳnh Khương An, phường 3, Tp. Vũng Tàu
          www.ennolite.com.vn

          Comment

          Working...
          X