• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Help GNS3, vmware với DHCP server

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help GNS3, vmware với DHCP server

    Hi các bác,
    Em có mô hình sau mong các giúp đỡ.
    Click image for larger version

Name:	dhcpserver.JPG
Views:	1
Size:	22.5 KB
ID:	207964

    Cisco 2691 ----> sw----> server và pc

    cổng f0/1 của router nối tới sw có địa chỉ ip: 10.10.0.1
    máy chủ có ip 10.10.0.10 chạy dhcp server cấp dải mạng từ 10.10.0.11 --> 10.10.0.254
    Máy PC đã nhận ip auto từ máy chủ.

    Lỗi của bài lab này là từ PC em ko ping đến được địa chỉ router: 10.10.0.1

    Click image for larger version

Name:	dhcpserver1.JPG
Views:	1
Size:	39.1 KB
ID:	207965

    Click image for larger version

Name:	dhcpserver2.JPG
Views:	1
Size:	97.4 KB
ID:	207966

    Bác nào đã từng lab kiểu này help em với.

  • #2
    Bạn có thể send code cấu hình lên được không bạn! Nếu giúp được mình sẽ giúp cho bạn. :)
    Last edited by ky_pim; 28-08-2012, 11:01 AM.

    Comment


    • #3
      R1#show run
      Building configuration...

      Current configuration : 1146 bytes
      !
      version 12.4
      service timestamps debug datetime msec
      service timestamps log datetime msec
      no service password-encryption
      !
      hostname R1
      !
      boot-start-marker
      boot-end-marker
      !
      !
      no aaa new-model
      memory-size iomem 5
      ip cef
      !
      !
      !
      !
      no ip domain lookup
      ip domain name lab.local
      ip auth-proxy max-nodata-conns 3
      ip admission max-nodata-conns 3
      !
      !
      !
      !
      !
      !
      !
      !
      !
      !
      !
      !
      !
      !
      !
      !
      !
      username admin privilege 15 password 0 ccna
      !
      !
      !
      !
      !
      !
      !
      interface FastEthernet0/0
      ip address 192.168.137.2 255.255.255.0
      ip nat outside
      ip virtual-reassembly
      duplex auto
      speed auto
      !
      interface FastEthernet0/1
      description ketnoi Lan
      ip address 10.10.0.1 255.255.0.0
      ip nat inside
      ip virtual-reassembly
      duplex auto
      speed auto
      !
      ip forward-protocol nd
      ip route 0.0.0.0 0.0.0.0 192.168.137.1
      !
      !
      ip http server
      ip http authentication local
      no ip http secure-server
      ip nat inside source list 1 interface FastEthernet0/0 overload
      !
      access-list 1 permit any
      !
      !
      !
      control-plane
      !
      !
      !
      !
      !
      !
      !
      !
      !
      !
      line con 0
      exec-timeout 0 0
      privilege level 15
      logging synchronous
      line aux 0
      exec-timeout 0 0
      privilege level 15
      logging synchronous
      line vty 0 4
      login
      !

      Comment


      • #4
        Rồi, bạn xem bạn đang dùng Vmware 1 hay 8 ? Xong rồi sau đó bạn vào phần mềm ảo hóa Vmware : VM->Settings->Custom Specific virtual Network -> bạn chọn đúng cái vmware mà bạn xài (cái mà bạn gắn IP đó bạn). OK! Thử xem có được không bạn.

        Comment


        • #5
          em dung vmware 1 bac ah. E dang ko hiểu nếu em bỏ đường truyền kết nối đến pc kia. thì ping mạng thông.

          Comment


          • #6
            10 phút nữa bạn pm qua yahoo mình đi mình thử xem. dinhhai_it@yahoo.com.

            Comment


            • #7
              nếu mà DHCP với VMware thì phải tắt chế độ DHCP card của VMware (thông qua edit cái virtual netword card ... bỏ dấu check dhcp đi) là ok

              Comment

              Working...
              X