• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Moi cac ban tra loi mot so cau hoi

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Moi cac ban tra loi mot so cau hoi

    Minh dang test BCMSN cua ******* v9, trong nay co 10 cau hoi chua tra loi, moi cac ban tra loi giup minh nha. Cam on moi nguoi nhieu.
    Moi cac ban xem file dinh kem nhe.
    Attached Files

  • #2
    câu 1 :

    Which three statements are true about the voice VLAN feature on a Catalyst 2950
    switch? Select three.
    A. The default CoS value for incoming traffic is set up to 0.
    B. The CoS value is trusted for 802.1p or 802.1q tagged traffic.
    C. PortFast is automatically disabled when a voice VLAN is configured.
    D. The voice VLAN feature is disabled by default.
    E. The IP phone accepts the priority of all tagged and untagged traffic and sets the CoS
    value to 4.
    F. When the voice VLAN feature is enabled, all untagged traffic is sent according to the
    default CoS priority of the port

    Trả lời là : A , B, F

    Giải thích :
    A. The default CoS value for incoming traffic is set up to 0.

    B. The CoS value is trusted for 802.1p or 802.1q tagged traffic.
    Vì yêu cầu rằng có 2 kiểu đóng gói dữ liệu : Data (802.1q) và Voice data (802.1p)

    F. When the voice VLAN feature is enabled, all untagged traffic is sent according to the
    default CoS priority of the port
    => xem giải thích của câu A
    Trần Mỹ Phúc
    tranmyphuc@hotmail.com
    Hãy add nick để có thông tin đề thi mới nhất :tranmyphuc (Hỗ trợ tối đa cho các bạn tự học)

    Cisco Certs : CCNP (Passed TSHOOT 1000/1000)

    Juniper Certs :
    JNCIP-ENT & JNCIP-SEC
    INSTRUCTORS (No Fee) : CISCO (Professional) , JUNIPER (Professional) , Microsoft ...

    [version 4.0] Ôn tập CCNA


    Comment


    • #3
      QUESTION NO: 2
      What does the globacl command udld enable accomplish?
      A. enables all fiber-optic LAN ports for Unidirectionla LINK Detection (UDLD)
      B. enables all copper media LAN ports Uniderectional Link Detection (UDLD)
      C. overrides the default UDLS setting for all ports
      D. globally enables all ports on the device for Unidirectional Link Detection (UDLS)
      Trả lời : có 2 hướng
      Nhiều người lầm tưởng chọn câu D vì hiện tại UDLD đã được dùng cho cả Cable quang và Cable đồng
      Tuy nhiên đáp án chính thức chọn A , bởi vì khi dùng câu lệnh ấy thì chỉ có cable quang được enable thôi còn nếu muốn dùng cho cả cable đồng thì phải vào mode (config-if)# gõ lệnh udld enable.
      Trần Mỹ Phúc
      tranmyphuc@hotmail.com
      Hãy add nick để có thông tin đề thi mới nhất :tranmyphuc (Hỗ trợ tối đa cho các bạn tự học)

      Cisco Certs : CCNP (Passed TSHOOT 1000/1000)

      Juniper Certs :
      JNCIP-ENT & JNCIP-SEC
      INSTRUCTORS (No Fee) : CISCO (Professional) , JUNIPER (Professional) , Microsoft ...

      [version 4.0] Ôn tập CCNA


      Comment


      • #4
        câu 3

        QUESTION NO: 3
        What two steps can be taken to help prevent VLAN hopping? Select two.
        A. Enable BPD guard
        B. Disable CDP on ports where it is not necessary
        C. Place unused ports in a common unrouted VLAN
        D. Prevent automatic trunk configuration
        E. Implement port security

        Trả lời : C, D

        Câu C : Place unused ports in a common unrouted VLAN => Vi du : add những port dùng tạo kết nối trunk với router chẳng hạn vào native Vlan mà lưu ý là không dùng native Vlan trong truyền thông giữa các VLAN
        Câu D : Luôn dùng câu lệnh switchport mode access ở những port cho kết nối với PC để ngăn ngừa việc hình thành kết nối trunk giữa PC và Switch.
        Trần Mỹ Phúc
        tranmyphuc@hotmail.com
        Hãy add nick để có thông tin đề thi mới nhất :tranmyphuc (Hỗ trợ tối đa cho các bạn tự học)

        Cisco Certs : CCNP (Passed TSHOOT 1000/1000)

        Juniper Certs :
        JNCIP-ENT & JNCIP-SEC
        INSTRUCTORS (No Fee) : CISCO (Professional) , JUNIPER (Professional) , Microsoft ...

        [version 4.0] Ôn tập CCNA


        Comment


        • #5
          Câu 4 :

          Trả lời là câu F :
          Trần Mỹ Phúc
          tranmyphuc@hotmail.com
          Hãy add nick để có thông tin đề thi mới nhất :tranmyphuc (Hỗ trợ tối đa cho các bạn tự học)

          Cisco Certs : CCNP (Passed TSHOOT 1000/1000)

          Juniper Certs :
          JNCIP-ENT & JNCIP-SEC
          INSTRUCTORS (No Fee) : CISCO (Professional) , JUNIPER (Professional) , Microsoft ...

          [version 4.0] Ôn tập CCNA


          Comment


          • #6
            câu 5:


            Last edited by tranmyphuc; 03-12-2007, 11:01 PM.
            Trần Mỹ Phúc
            tranmyphuc@hotmail.com
            Hãy add nick để có thông tin đề thi mới nhất :tranmyphuc (Hỗ trợ tối đa cho các bạn tự học)

            Cisco Certs : CCNP (Passed TSHOOT 1000/1000)

            Juniper Certs :
            JNCIP-ENT & JNCIP-SEC
            INSTRUCTORS (No Fee) : CISCO (Professional) , JUNIPER (Professional) , Microsoft ...

            [version 4.0] Ôn tập CCNA


            Comment


            • #7
              câu 9:

              QUESTION NO: 9
              You work as a network technichian at ********.com. Please study the exhibit
              carefully. You need to configure DHCP snooping on a switch. Which three steps are
              required? Select 3.
              A.Configure the switch to insert and remove DHCP relay information (option-82 field) in
              forwarded DHCP request messages.
              B. Configure DHCP snooping globally.
              C. Configure the switch as a DHCP server.
              D. Configure DHCP snooping on an interface.
              E. Configure all interfaces as DHCP snooping trusted interfaces.
              F. Configure DHCP snooping on a VLAN or range of VLANs.
              Trả lời :
              Trần Mỹ Phúc
              tranmyphuc@hotmail.com
              Hãy add nick để có thông tin đề thi mới nhất :tranmyphuc (Hỗ trợ tối đa cho các bạn tự học)

              Cisco Certs : CCNP (Passed TSHOOT 1000/1000)

              Juniper Certs :
              JNCIP-ENT & JNCIP-SEC
              INSTRUCTORS (No Fee) : CISCO (Professional) , JUNIPER (Professional) , Microsoft ...

              [version 4.0] Ôn tập CCNA


              Comment


              • #8
                câu 6 :trust boundary



                Dưới đây là file đính kèm , dùng để cấu hình trust boudary
                Attached Files
                Trần Mỹ Phúc
                tranmyphuc@hotmail.com
                Hãy add nick để có thông tin đề thi mới nhất :tranmyphuc (Hỗ trợ tối đa cho các bạn tự học)

                Cisco Certs : CCNP (Passed TSHOOT 1000/1000)

                Juniper Certs :
                JNCIP-ENT & JNCIP-SEC
                INSTRUCTORS (No Fee) : CISCO (Professional) , JUNIPER (Professional) , Microsoft ...

                [version 4.0] Ôn tập CCNA


                Comment


                • #9
                  câu 7:

                  QUESTION NO: 7
                  You work as a network technichian at ********.com. Please study the exhibit
                  carefully. A client is searching for an access point (AP). What is the correct process
                  order that the client and access point goes through to create a connection?
                  A. association request/response, probe request/response, authentication request/response
                  B. association request/response, authentication request/response, probe request/response
                  C. probe request/response, authentication request/response, association request/response
                  D. probe request/response, association request/response, authentication request/response
                  Trả lời : câu C
                  Trần Mỹ Phúc
                  tranmyphuc@hotmail.com
                  Hãy add nick để có thông tin đề thi mới nhất :tranmyphuc (Hỗ trợ tối đa cho các bạn tự học)

                  Cisco Certs : CCNP (Passed TSHOOT 1000/1000)

                  Juniper Certs :
                  JNCIP-ENT & JNCIP-SEC
                  INSTRUCTORS (No Fee) : CISCO (Professional) , JUNIPER (Professional) , Microsoft ...

                  [version 4.0] Ôn tập CCNA


                  Comment


                  • #10
                    File pdf tổng hợp các bài viết trên

                    File pdf tổng hợp các bài viết trên để các anh chị dễ theo dỗi hơn
                    PAss mo file :phuc
                    Attached Files
                    Last edited by tranmyphuc; 08-12-2007, 12:31 PM.
                    Trần Mỹ Phúc
                    tranmyphuc@hotmail.com
                    Hãy add nick để có thông tin đề thi mới nhất :tranmyphuc (Hỗ trợ tối đa cho các bạn tự học)

                    Cisco Certs : CCNP (Passed TSHOOT 1000/1000)

                    Juniper Certs :
                    JNCIP-ENT & JNCIP-SEC
                    INSTRUCTORS (No Fee) : CISCO (Professional) , JUNIPER (Professional) , Microsoft ...

                    [version 4.0] Ôn tập CCNA


                    Comment

                    Working...
                    X