Originally posted by KhiAbu
Cisco 3640 Router as PPPoE Server
username cisco password cisco
!−−− Username matches that on the PIX.
!−−− Enable virtual private dial−up network (VPDN).
vpdn enable
!
!−−− Define the VPDN group to be used for PPPoE.
vpdn−group pppoex
accept−dialin
protocol pppoe
virtual−template 1
!
interface FastEthernet3/0
ip address 172.21.48.30 255.255.255.224
!−−− Enable PPPoE sessions on the interface.
pppoe enable
!
interface Virtual−Template1
mtu 1492
!−−− Do not use a static IP assignment within a virtual template since
!−−− routing problems can occur. Instead, use the ip unnumbered command
!−−− when configuring a virtual template.
ip unnumbered FastEthernet3/0
peer default ip address pool pixpool
!−−− Define authentication protocol.
ppp authentication pap
!
ip local pool pixpool 11.11.11.1 11.11.11.100
Comment