hi all, can any one tell me what am I wrong with this configuration :
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname PlantRouter
!
aaa new-model
aaa authentication login default local
aaa authentication login no_login none
aaa authentication ppp default local
enable secret 5 <deleted>
!
username remote password 0 abc123
!
!
!
!
ip subnet-zero
ip host modem1 2001 192.168.1.250
!
!
!
process-max-time 200
!
interface Ethernet0
description Connect to Plant LAN
ip address 192.168.1.250 255.255.255.0
no ip directed-broadcast
!
interface Serial0
description Connect to Ha Noi Site
ip address 192.168.250.6 255.255.255.252
no ip directed-broadcast
!
interface Serial1
no ip address
no ip directed-broadcast
shutdown
!
interface Group-Async1
ip unnumbered Ethernet0
no ip directed-broadcast
encapsulation ppp
ip tcp header-compression
async default routing
async mode interactive
peer default ip address pool DialUpPool
ppp authentication pap
group-range 1 16
!
ip local pool DialUpPool 192.168.1.230 192.168.1.245
ip default-gateway 192.168.1.250
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0
no ip http server
!
!
line con 0
login authentication no_login
transport input none
line 1 16
autoselect during-login
autoselect ppp
modem InOut
modem autoconfigure discovery
transport input all
stopbits 1
speed 115200
line aux 0
line vty 0 4
!
end
PlantRouter#
The trouble here is modem isn't answer the incomming call, modem Auto Answer turned on already. Reverse telnet to modem worked well, i can use AT command, did reseting to factory default, turn on AA and other settings, modem are Hayes Accura V.92 (http://www.hayes.co.uk), router is Cisco-2511, following are information issued by show version command :
------------
sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-I-L), Version 12.0(5)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Fri 23-Jul-99 03:14 by kpma
Image text-base: 0x03039754, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
PlantRouter uptime is 1 hour, 45 minutes
System returned to ROM by power-on
System image file is "flash:c2500-i-mz_120-5_t.bin"
cisco 2511 (68030) processor (revision K) with 2048K/2048K bytes of memory.
Processor board ID 01499917, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
16 terminal line(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
PlantRouter#
--------------------------
I am in a boring world now, this is not first time I meet this trouble... :(
TIA
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname PlantRouter
!
aaa new-model
aaa authentication login default local
aaa authentication login no_login none
aaa authentication ppp default local
enable secret 5 <deleted>
!
username remote password 0 abc123
!
!
!
!
ip subnet-zero
ip host modem1 2001 192.168.1.250
!
!
!
process-max-time 200
!
interface Ethernet0
description Connect to Plant LAN
ip address 192.168.1.250 255.255.255.0
no ip directed-broadcast
!
interface Serial0
description Connect to Ha Noi Site
ip address 192.168.250.6 255.255.255.252
no ip directed-broadcast
!
interface Serial1
no ip address
no ip directed-broadcast
shutdown
!
interface Group-Async1
ip unnumbered Ethernet0
no ip directed-broadcast
encapsulation ppp
ip tcp header-compression
async default routing
async mode interactive
peer default ip address pool DialUpPool
ppp authentication pap
group-range 1 16
!
ip local pool DialUpPool 192.168.1.230 192.168.1.245
ip default-gateway 192.168.1.250
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0
no ip http server
!
!
line con 0
login authentication no_login
transport input none
line 1 16
autoselect during-login
autoselect ppp
modem InOut
modem autoconfigure discovery
transport input all
stopbits 1
speed 115200
line aux 0
line vty 0 4
!
end
PlantRouter#
The trouble here is modem isn't answer the incomming call, modem Auto Answer turned on already. Reverse telnet to modem worked well, i can use AT command, did reseting to factory default, turn on AA and other settings, modem are Hayes Accura V.92 (http://www.hayes.co.uk), router is Cisco-2511, following are information issued by show version command :
------------
sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-I-L), Version 12.0(5)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Fri 23-Jul-99 03:14 by kpma
Image text-base: 0x03039754, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
PlantRouter uptime is 1 hour, 45 minutes
System returned to ROM by power-on
System image file is "flash:c2500-i-mz_120-5_t.bin"
cisco 2511 (68030) processor (revision K) with 2048K/2048K bytes of memory.
Processor board ID 01499917, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
16 terminal line(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
PlantRouter#
--------------------------
I am in a boring world now, this is not first time I meet this trouble... :(
TIA
Comment