Tweet
mình muốn cấu hình win2k3 thành router:
LAN 1 : 192.168.1.0/24
LAN 2 : 10.0.0.0/8
Card mạng 1: 192.168.1.1
Card mạng 2: 10.0.0.1
Các bước cấu hình như sau:
Windows Server 2003 can do much more than just file sharing and Web site hosting. Using the Routing And Remote Access Services (RRAS) component, you can configure your Windows Server 2003 system to act as a router. For this to work, you need to have multiple network adapters on different subnets.
To set this up, follow these steps:
1. Start RRAS by going to Start | All Programs | Administrative Tools | Routing And Remote Access.
2. Locate the server in the left-hand pane, and right-click it.
3. Select Configure And Enable Routing And Remote Access from the shortcut menu. This launches a wizard.
4. On the first step of the wizard, select Custom Configuration, and click Next.
5. On the Custom Configuration page in the wizard, select the LAN Routing option.
6. Click Next, and click Finish.
In the RRAS window, right-click the server, and select Properties. On the General tab, you'll see the Enable This Computer As A Router option selected, along with the Perform LAN Routing Only option. On the IP tab, you'll see the Enable IP Routing option selected.
- Khi thực hiện ping từ máy LAN1 sang LAN2 thì not OK
- ping từ host 2 mạng vào 2 dịa chỉ trên win2k3 đều OK
Bạn nào có thể cho vài ý kiến về lỗi routing này được không ??? tại các host tại mỗi net việc đặt defaul gateway như thế nào ?? mình đã test đặt ip of card mạng trên win2k3 vẫn fail.
LAN 1 : 192.168.1.0/24
LAN 2 : 10.0.0.0/8
Card mạng 1: 192.168.1.1
Card mạng 2: 10.0.0.1
Các bước cấu hình như sau:
Windows Server 2003 can do much more than just file sharing and Web site hosting. Using the Routing And Remote Access Services (RRAS) component, you can configure your Windows Server 2003 system to act as a router. For this to work, you need to have multiple network adapters on different subnets.
To set this up, follow these steps:
1. Start RRAS by going to Start | All Programs | Administrative Tools | Routing And Remote Access.
2. Locate the server in the left-hand pane, and right-click it.
3. Select Configure And Enable Routing And Remote Access from the shortcut menu. This launches a wizard.
4. On the first step of the wizard, select Custom Configuration, and click Next.
5. On the Custom Configuration page in the wizard, select the LAN Routing option.
6. Click Next, and click Finish.
In the RRAS window, right-click the server, and select Properties. On the General tab, you'll see the Enable This Computer As A Router option selected, along with the Perform LAN Routing Only option. On the IP tab, you'll see the Enable IP Routing option selected.
- Khi thực hiện ping từ máy LAN1 sang LAN2 thì not OK
- ping từ host 2 mạng vào 2 dịa chỉ trên win2k3 đều OK
Bạn nào có thể cho vài ý kiến về lỗi routing này được không ??? tại các host tại mỗi net việc đặt defaul gateway như thế nào ?? mình đã test đặt ip of card mạng trên win2k3 vẫn fail.
Comment