Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Các câu trả lời sai trong **** CCNA v85

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Các câu trả lời sai trong **** CCNA v85

    Em sắp thi CCNA, hiện đang gấp rút ôn lại ***, nhờ các anh chị và các bạn phát hiện thêm một số câu sai trong ***.
    Câu 12, topic 1, session 5 có vấn đề gì không ạ?
    (Hình vẽ)
    You need to play an accesslist on Fa0 interface of the Home router, that will
    deny access to all hosts that lie within the range 192.168.160.0-192.168.191.0. Hosts in the 192.168.195.0 network should be granted full access. Which one of the following answer choices fulfills your needs?
    A. access-list 1 deny 192.168.163.0 0.0.0.255
    B. access-list 1 deny 192.168.128.0 0.0.127.255
    C. access-list 1 deny 192.168.0.0 0.0.255.255
    D. access-list 1 deny 192.168.0.0 0.0.31.255
    ********trả lời là câu D, nhưng theo em nghĩ thì tương ứng với range 192.168.160.0 - 192.168.191.0 thì phải là
    access-list 1 deny 192.168.160.0 0.0.31.255 chứ? Xin được góp ý.
    -------------------------------------------------------------------
    Câu 19, topic 2, session 2
    Which of the following addresses can be assigned to a host when using a subnet mask of 255.255.254.0? (Select three)
    A. 113.10.4.0
    B. 186.54.3.0
    C. 175.33.3.255
    D. 26.35.3.255
    E. 152.135.7.0
    F. 17.35.36.0
    Đáp án của *** là B, C, E.
    Theo em nghĩ, thì câu C, x.x.0000001|1.11111111 là một địa chỉ broadcast, đâu gán cho host được ạ? Nhưng đề biểu phải chọn 3 đáp án, ở đây câu A,F là địa chỉ Net, câu C,D là địa chỉ broadcast...... Vậy chỉ còn chọn được hai câu là B và E thôi. Mong được góp ý đúng sai!
    ------------------------------------------------------------------

  • #2
    Tiếp,

    Câu 2, topic 2, session10, trang 269 cua ***v85
    (Hình vẽ)
    You're the systems administrator at Testing, and you create the following access control lists.
    access-list 101 deny tcp 5.1.1.10 0.0.0.0 5.1.3.0 0.0.0.255 eq telnet
    access-list 101 permit any any

    You then enter the command "ip access-group 101 in" to apply access control list 101 to router **1s e0 interface.

    Which of the following Telnet sessions will be blocked as a result of your access lists? (Select all that apply)
    A. Telnet sessions from host A to host 5.1.1.10
    B. Telnet sessions from host A to host 5.1.3.10
    C. Telnet sessions from host B to host 5.1.2.10
    D. Telnet sessions from host B to host 5.1.3.8
    E. Telnet sessions from host C to host 5.1.3.10
    F. Telnet sessions from host F to host 5.1.1.10
    Đáp án là câu D và câu F, em còn phân vân câu F. Liệu ACL có cấm tracffic ngược lại không?

    Comment


    • #3
      Còn nưa???

      Còn câu nào nữa không ạ? chỉ giáo cho em với....

      Comment


      • #4
        Câu 21, trang 202 ***v85, topic2, session4

        When a new trunk link is configured on an IOS based switch, which VLANs are
        allowed over the link?
        A. By default, all defined VLANs are allowed on the trunk.
        B. Each single VLAN, or VLAN range, must be specified with the switchport mode command.
        C. Each single VLAN, or VLAN range, must be specified with the vtp domain command.
        D. Each single VLAN, or VLAN range, must be specified with the vlan database
        command.
        Đáp án là A, nhưng ở câu 4 trang 188 cũng có một câu i chang như vậy mà đáp án là C. Em thì thấy cả hai câu đều có lý. Bó tay. Có ai giải thích dùm em với.

        Comment


        • #5
          Câu 21, trang 202 ***v85, topic2, session4

          Đáp án câu này là A. Ở chế độ mặc định trunk link sẽ vận chuyển tất cả các VLAN.
          Trên switch có hỗ trợ các command dể add, remove, ...VLAN trên đường trunk.......
          thanks
          I will not study alone!!!

          Comment


          • #6
            tư vấn dùm em câu này với,

            You just purchased a refurbished router that contains a configuration from a
            previous deployment. What should you do, before entering a new configuration into the router?
            A. RAM should be erased and the router restarted.
            B. Flash should be erased and the router restarted.
            C. NVRAM should be erased and the router restarted.
            D. The new configuration should be entered and saved.

            Nên chọn đáp án nào đây? Chỉ chọn một!

            Comment


            • #7
              hi

              Theo mình, thì đáp án là C.
              Crack password--> erase NVRAM--->reload.
              I will not study alone!!!

              Comment


              • #8
                Theo mình đáp án đúng la D.Ví đây là 1 new router chưa có cấu hình gì.Nên chỉ cần configure va save :)
                Không có việc gì khó,chỉ sợ tiền không nhiều.
                Certs:BLXA1,BLXB2

                Comment


                • #9
                  Đáp án là C vì " refurbished router that contains a configuration from a
                  previous deployment ". Phải xóa cấu hình cũ đi chứ.
                  Hữu ý lạc hoa :) :)
                  Vô tình lưu thủy :( :(

                  Comment


                  • #10
                    câu 22 trang 338-339
                    (hình vẽ trang 338)
                    A technician is investigating a problem with the network shown above. These
                    symptoms have been observed:
                    1. All of the user hosts can access the Internet.
                    2. None of the user hosts can access the server in VLAN9
                    3. All of the hosts can ping each other.
                    What could cause the symptoms?
                    A. Interface S0/0 on the router is down.
                    B. Interface Fa0/1 on the router is down.
                    C. Interface Fa0/5 on ********3 is down.
                    D. Interface Fa0/4 on ********3 is down.
                    E. ********2 is turned off.
                    F. Trunking is not enabled on the link between ********1 and ********3.
                    Answer: B
                    Mình thấy đáp án D thì đúng hơn ?????????
                    --------------------------------------------------------------------------------------
                    câu 1 trang 317
                    There are 2 switches in the ******** LAN, with no routers. Ports 1, 2 & 3 are
                    assigned to VLAN 1 in switch 1 and 2 and ports 4, 5 & 6 are assigned to VLAN 2 in
                    both switches. These two switches are connected together via a trunked link. Which
                    of the conditions below would verify trunk and VLAN operation? (Select all valid
                    answers)
                    A. Host 1 on VLAN 1 can ping Host 2 on VLAN 1
                    B. Host 1 on VLAN 1 can ping Host 4 on VLAN 2
                    C. Host 1 on VLAN 1 can not ping Host 2 on VLAN 1
                    D. Host 4 on VLAN 2 can not ping Host 1 on VLAN 1
                    E. Host 4 on VLAN 2 can ping Host 2 on VLAN 2
                    Answer: A, D, E
                    mình thầy câu E không chính xác ,
                    Các bác xem hộ em với .

                    Comment

                    Working...
                    X