• If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Xin chào ! Nếu đây là lần đầu tiên bạn đến với diễn đàn, xin vui lòng danh ra một phút bấm vào đây để đăng kí và tham gia thảo luận cùng VnPro.

Announcement

Collapse
No announcement yet.

Mời trao đổi một số câu hỏi ôn tập CCNA

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    hi,

    bạn phải chọn A và chọn thêm 2 câu lệnh còn lại. Hai câu lệnh còn lại sẽ phụ thuộc vào hình vẽ trong sơ đồ khi bạn đi thi. Option B không được chọn vì sai cú pháp.

    thân mến,

    Comment


    • #17
      Originally posted by cacodemon
      17. Exhibit:

      Given the topology as illustrated, what commands are needed to configure IGRP on the Contoso1 Router? (Choose three)

      A. Contoso1 (config ) # Router IGRP 100
      B. Contoso1 (config) # router IGRP
      C. Contoso1 (config - router) # network 192.168.6.0
      D. Contoso1 (config - router) # network 192.168.7.0
      E. Contoso1 (config - router) # network 192.168.8.0
      F. Contoso1 (config - router) # network 192.168.9.0

      Answer: A
      :roll: :roll: :roll: :roll: :roll:
      Contoso1 có hai interface s0: ip 192.168.7,s1 ip 192.168.8.2
      Contoso2 có 2 int s0 ip 192.168.8.2, s1 192.168.9.1

      192.168.7.1 s0 Contoso1 :idea: <---> Contoso2 :idea: s1 192.168.9.1,s0 192.168.6.3
      192.168.8.2 s1
      Mấy bạn ơi có phải như dzầy ko?
      Chọn A D E nha

      Comment


      • #18
        hi, ok.
        Email : vnpro@vnpro.org
        ---------------------------------------------------------------------------------------------------------------
      Trung Tâm Tin Học VnPro
      149/1D Ung Văn Khiêm P25 Q.Bình thạnh TPHCM
      Tel : (08) 35124257 (5 lines)
      Fax: (08) 35124314

      Home page: http://www.vnpro.vn
      Support Forum: http://www.vnpro.org
      - Chuyên đào tạo quản trị mạng và hạ tầng Internet
      - Phát hành sách chuyên môn
      - Tư vấn và tuyển dụng nhân sự IT
      - Tư vấn thiết kế và hỗ trợ kỹ thuật hệ thống mạng

      Network channel: http://www.dancisco.com
      Blog: http://www.vnpro.org/blog

      Comment


      • #19
        4. Which statement describes the rule of split horizon?

        A. Only routers can split boundaries (horizons) between concentric networks.
        B. All distance vector protocols require fall back routers that may cause momentary loops as the topology changes.
        C. Networks can only remain fully converged if all information about routers is sent out all active interfaces.
        D. Information about a route should not be sent back in the direction from which the original update come.
        E. Each AS must keep routing tables converged to prevent dead routes from being advertised across the AS boundary.

        Câu này các bạn nghĩ sao. Theo mình là câu C. Nếu ko đúng nhờ các bạn help me!Sẽ cám ơn nhiều hơn nữa.

        Comment


        • #20
          Hi

          Bạn nên chọn D. Luật split-horizon nói rằng một route không nên được gửi ngược lai nơi mà route đó đến.

          Mến,

          Comment


          • #21
            Thêm một đáp án nữa rồi, xin cám ơn bạn. Ua Dang Nguyen Nhi co bà con gì với Dang Quang ko v :?:

            Comment


            • #22
              Re: Mời trao đổi một số câu hỏi ôn tập CCNA (part I)


              -
              RouterA------------------------------------- RouterB--------------------------------------RouterC
              (114.125.16.0/24, 116.226.46.0/24)----------------- (123.92.76.0/24,136.125.85.0/24)

              6 What actions will occur after RouterA loses connectivity to network 114.125.16.0? (Choose two.)
              A.RouterB will include network 123.92.76.0 and 136.125.85.0 in its update to RouterA.
              B.During the next update interval, RouterB will send a RIP update out both ports that includes the inaccessible network.
              C.During the next update interval, RouterC will send an update to RouterB stating that network 114.125.16.0 is accessible in 2 hops.
              D.Router C will learn of the loss of connectivity to network 114.125.16.0 from RouterB.
              E.RouterB will include network 123.92.76.0 and 136.125.85.0 in its update to RouterC.

              Các bạn ơi ? :?:

              Comment


              • #23
                hi

                Khi net 114.125.16.0 bị down, router C sẽ nhận được thông tin này từ router B. Do đó bạn nên chọn D. Đối với routerB, B sẽ gửi thông tin cập nhật route 114.125.10.0 như là inaccessible (không thể truy cập) ra các interface của nó. Tuy nhiên, cacodemon cần xem xét lại phương án chọn B do hình vẽ không rõ lắm.

                mến,
                Đặng Quang Minh, CCIEx2#11897 (Enterprise Infrastructure, Wireless), DEVNET, CCSI#31417

                Email : dangquangminh@vnpro.org
                https://www.facebook.com/groups/vietprofessional/

                Comment


                • #24
                  Anh Minh, trên hình đó là Router A và Router C mỗi Router đều có hai (network address). Theo em nghĩ :
                  Khi 114.125.16.0 is down thì Router B sẽ thông báo cho những posts khác là mạng 114.125.16.0 is down. Đồng thời Router C cũng sẽ update được cái mạng 114.125.16.0 bị down. :P Vậy đáp án là câu B & D đúng ko anh?. :(
                  Cho em hỏi nếu trường hợp này có được ko a? During the next update interval,Router C will send an update to RouterB stating that network 114.125.16.0 is accessible in 2 hops.

                  Comment


                  • #25
                    3. Which of the following are characteristics of microsegmentation? (Choose two)

                    A. Dedicated paths between sending and receiving host are established
                    B. the number of collision domains is decreased
                    C. Broadcast domain are enlarged
                    D. Multiple subnetwork broadcast addresses are created
                    E. Multiple ARP tables are required on the connected hosts
                    F. Bandwidth is dedicated to connect hosts
                    Anh Minh ơi !!!
                    Theo Em nghĩ thì câu này phải là B&D thì mới đúng chứ, theo Em nghĩ thì hình như có sự nhầm lẩn giữa "collision domains" và "domanin" .số lượng domain thì tăng lên , còn collision thì giảm xuống .......Hay hai khái niệm này chỉ là một thôi .Còn câu A thì .....hình như chả dính dáng gì tới câu hỏi này cả(Em đọc cả buổi mà củng không dịch được ý câu này là gì nữa......chỉ lơ mơ màng thôi) Mong Anh Chị Em chỉ giáo thêm vậy

                    Comment


                    • #26
                      đã có những thảo luận bất tận về collison domain và broadcast domain ở đây:

                      Phân biệt collision domain và broadcast domain?


                      Comment


                      • #27
                        Re: Mời trao đổi một số câu hỏi ôn tập CCNA (part I)

                        Originally posted by cacodemon

                        -
                        RouterA----------------------------- RouterB---------------------------RouterC
                        (114.125.16.0/24, 116.226.46.0/24)----- (123.92.76.0/24,136.125.85.0/24)

                        6 What actions will occur after RouterA loses connectivity to network 114.125.16.0? (Choose two.)
                        A.RouterB will include network 123.92.76.0 and 136.125.85.0 in its update to RouterA.
                        B.During the next update interval, RouterB will send a RIP update out both ports that includes the inaccessible network.
                        C.During the next update interval, RouterC will send an update to RouterB stating that network 114.125.16.0 is accessible in 2 hops.
                        D.Router C will learn of the loss of connectivity to network 114.125.16.0 from RouterB.
                        E.RouterB will include network 123.92.76.0 and 136.125.85.0 in its update to RouterC.

                        Các bạn ơi ? :?:
                        Router A có 2 interface: 114.125.16.0/24, 116.226.46.0/24
                        Router C có 2 interface: 123.92.76.0/24,136.125.85.0/24
                        danguyennhi ơi bạn thấy câu C ở đây có được ko? Nếu mình chọn nó là câu trả lời với câu D. :roll:

                        Comment


                        • #28
                          Hi cacodemon

                          luật split-horzon nói rằng một router sẽ không quảng bá ngược lại một route mà từ đó route được được nhận. trên sơ đồ của cacodemon, net 114.125.16.0 là do B quảng bá đến. Do đó C sẽ không bao giờ quảng bá ngược lại route 114.125.16.0 về lại cho B.

                          thân,
                          Email : vnpro@vnpro.org
                          ---------------------------------------------------------------------------------------------------------------
                          Trung Tâm Tin Học VnPro
                          149/1D Ung Văn Khiêm P25 Q.Bình thạnh TPHCM
                          Tel : (08) 35124257 (5 lines)
                          Fax: (08) 35124314

                          Home page: http://www.vnpro.vn
                          Support Forum: http://www.vnpro.org
                          - Chuyên đào tạo quản trị mạng và hạ tầng Internet
                          - Phát hành sách chuyên môn
                          - Tư vấn và tuyển dụng nhân sự IT
                          - Tư vấn thiết kế và hỗ trợ kỹ thuật hệ thống mạng

                          Network channel: http://www.dancisco.com
                          Blog: http://www.vnpro.org/blog

                          Comment


                          • #29
                            1.Which statement describes the routing protocol OSPF (choose 3)

                            A.It supports VLSM
                            B.It is used to between Autonomous systems
                            C.It confines network instability to one area of network
                            D.It increases routing overhead over the network
                            E.It allows extensive control of the routing update
                            F.it is simpler to configure than RIPv2

                            Answer : A D E

                            Comment


                            • #30
                              2. Error detection schemes use which field of frame to detect error?

                              A.MTU
                              B.MAC
                              C.FCS
                              D.PDU
                              E.ERR
                              F. Flag

                              Answer C

                              Comment

                              • Working...
                                X